Your LBLD System Is Fully Supported
If you own an LBLD motor or Simple Pump Solar Kit, your system continues to receive full support from Simple Pump. Parts remain available, warranty terms are unchanged, and our support team is here to help.
Simple Pump discontinued the LBLD motor and Simple Pump Solar Kit for new sales as of [DATE TBD]. Existing customers are not affected. Your system continues to receive full support.
Jump to your system:
What “Continued Support” Means
Parts Availability
All LBLD-specific parts remain available while supplies last. Motor Cap & Brush Kit, seal kits, and spare parts kits can be ordered through Simple Pump directly or through your local dealer. Parts and support continue through [SUPPORT DURATION TBD].
Warranty Unchanged
Your existing warranty terms are unchanged. If your LBLD motor or Solar Kit is within its warranty period, your coverage continues under the original terms. Contact Simple Pump for warranty claims or questions.
Technical Support
Our support team can assist with LBLD motor and Solar Kit diagnostics, installation questions, and troubleshooting. Same phone number, same email, same team — nothing has changed for existing customers.
LBLD Motor Support
Available LBLD Motor Parts
The following LBLD-specific parts can be ordered from Simple Pump. These items are marked as “Discontinued” in the parts catalog — no longer manufactured in new production runs — but available stock continues to be sold to support existing customers.
| Part | Description | Availability |
|---|---|---|
| Motor Cap & Brush Kit | Replacement brushes and motor cap for LBLD motors | Available — existing stock |
| Seal Kit (Standard) | Standard replacement seal kit for LBLD motor | Available — existing stock |
| Spare Parts Kit (Heavy-Duty) | Heavy-duty spare parts for LBLD motor | Available — existing stock |
| Spare Parts Kit (Standard) | Standard spare parts for LBLD motor | Available — existing stock |
LBLD Motor Quick Reference
Simple Pump Solar Kit Support
The Simple Pump Solar Kit (SPK-740) powered the LBLD motor using two 370-watt monocrystalline solar panels with an MPPT charge controller. If you own this kit, your panels, controller, and mounting hardware continue to receive full support.
Solar Kit Component Reference
| Component | Specification | Notes |
|---|---|---|
| Solar Panels | 2× 370W monocrystalline (740W total) | Weather-resistant; standard MC4 connectors |
| Charge Controller | MPPT (Maximum Power Point Tracking) | Compatible with 12V or 24V battery bank |
| Mounting Hardware | 100 MPH wind-rated panel mounts | Ground or roof mount configurations |
| Wiring Harness | UV-resistant solar cable with MC4 connectors | Run alongside drop pipe to surface |
| Batteries | 12V or 24V deep cycle (customer-provided) | Not included in SPK-740 kit |
| Timer | Programmable pump timer included | Set automated fill schedules |
About the MPPT Charge Controller
The MPPT charge controller included in the Solar Kit manages power from the solar panels to your battery bank and LBLD motor. It automatically adjusts to extract maximum power from the panels across varying light conditions.
For controller replacement or compatibility questions, contact Simple Pump support.
Solar Kit Troubleshooting
Pump not running despite sunlightClick to expand
- •Check battery voltage — must be above minimum threshold for controller to activate
- •Inspect MC4 connectors for corrosion or loose connections
- •Verify charge controller display shows panel input voltage
- •Test with direct battery connection to isolate controller vs motor issue
Pump runs but output is reducedClick to expand
- •Check for air leaks in drop pipe or cylinder check valve
- •Inspect motor brushes — brush wear reduces output over time
- •Verify water level hasn't dropped below pump intake depth
- •Check for partial blockage in discharge line
Batteries not chargingClick to expand
- •Verify panels are clean and unshaded
- •Check charge controller input terminals for proper connection
- •Test panel open-circuit voltage with multimeter (should be ~45V per 370W panel)
- •Inspect wiring for damaged insulation
Timer not activating pumpClick to expand
- •Verify timer is programmed (ON/OFF schedule set)
- •Check timer output voltage is reaching motor leads
- •Confirm battery bank is sufficiently charged for motor start
Ready to Upgrade? Here's Your Path.
When you're ready to move to the new solar submersible system, Simple Pump offers a retrofit path using our new Simple Pump Inline Dual-Pump Valve Assembly. The Inline Dual-Pump Valve Assembly connects a Workhorse Narrow Series solar submersible pump to your existing Simple Pump cylinder and drop pipe — no need to replace your pump head or rods.
What the upgrade involves:
- Remove existing LBLD motor assembly and lever arm
- Thread the Simple Pump Inline Dual-Pump Valve Assembly onto the Workhorse pump suction port (NPT connection)
- Install spring check valve above the valve assembly
- Reinstall existing Simple Pump cylinder, drop pipe, and pump head
- Run solar cable alongside drop pipe to surface
- Install Workhorse PSC100 solar controller and solar panels at surface
Retrofit kit contents and pricing: [INPUT REQUIRED — Steve to confirm]
The Workhorse solar submersible system is installed by Simple Pump dealers and authorized Workhorse Pumps professional installers.
Need Help With Your LBLD System?
Our support team is the same team it's always been. Contact us for parts orders, technical questions, warranty claims, or upgrade planning.
Parts Catalog
Browse all available LBLD parts, labeled as Discontinued with availability status.
View Parts Catalog →Simple Pump stands behind every product we've sold. Discontinuing the LBLD motor and Solar Kit for new sales does not change our commitment to customers who already own one. Parts, service, and warranty continue as promised through [SUPPORT DURATION TBD].